BACK TO CATEGORIES
P130L
P130L

The ADCA P130L low flow series direct-acting, springloaded diaphragm sensing, pressure reducing valves are designed for use with clean air, nitrogen, carbon dioxide, oxygen, argon and other gases or liquids compatible with the construction materials and valve design. This valve is specifically designed for the high purity gas systems found in the pharmaceutical, cosmetic, fine chemical and food & beverage processes.

MATERIAL

Stainless steel

SIZES

1/2” to 3/4” – DN 08 to DN 20

CONNECTIONS

ASME BPE, DIN and ISO clamp ferrules or tube weld (ETO) ends

MAX. UPSTREAM PRESSURE

16 bar

MAX. DESIGN TEMPERATURE

150 ºC

REGULATING RANGE

0,2 to 8 bar

FLOW RATE COEFFICIENTS

Kvs 0,06 to 0,25
Ask for info

Whether you have a question about products, pricing, customized equipment, or anything else, our team is ready to help you.

P130K
P130K

The ADCA P130 series direct-acting, spring-loaded diaphragm sensing, pressure reducing valves are designed for use with clean air, nitrogen, carbon dioxide, oxygen, argon and other gases or liquids compatible with the construction materials and valve design. This valve is specifically designed for the high purity gas systems found in the pharmaceutical, cosmetic, fine chemical and food & beverage processes.

MATERIAL

Stainless steel

SIZES

1/2” to 3/4” – DN 08 to DN 20

CONNECTIONS

ASME BPE, DIN and ISO clamp ferrules or tube weld (ETO) ends

MAX. UPSTREAM PRESSURE

16 bar

MAX. DESIGN TEMPERATURE

150 ºC

REGULATING RANGE

0,2 to 8 bar

FLOW RATE COEFFICIENTS

Kvs 0,7 to 1,3
Ask for info

Whether you have a question about products, pricing, customized equipment, or anything else, our team is ready to help you.

P130J
P130J

The ADCA P130 series direct-acting, spring-loaded diaphragm sensing, pressure reducing valves are designed for use with clean air, nitrogen, carbon dioxide, oxygen, argon and other gases or liquids compatible with the construction materials and valve design. This valve is specifically designed for the high purity gas systems found in the pharmaceutical, cosmetic, fine chemical and food & beverage processes.

MATERIAL

Stainless steel

SIZES

1/2” to 1” – DN 08 to DN 25

CONNECTIONS

ASME BPE, DIN and ISO clamp ferrules or tube weld (ETO) ends

MAX. UPSTREAM PRESSURE

16 bar

MAX. DESIGN TEMPERATURE

150 ºC

REGULATING RANGE

0,2 to 8 bar

FLOW RATE COEFFICIENTS

Kvs 1,7 to 2,4
Ask for info

Whether you have a question about products, pricing, customized equipment, or anything else, our team is ready to help you.

P130H
P130H

The ADCA P130H series direct-acting, spring-loaded diaphragm sensing, balanced plug, pressure reducing valves are designed for use with clean air, nitrogen, carbon dioxide, oxygen, argon and other gases or liquids compatible with the construction materials and valve design. This valve is specifically designed for the high purity gas systems found in the pharmaceutical, cosmetic, fine chemical and food & beverage processes.

MATERIAL

Stainless steel

SIZES

1” – DN 25

CONNECTIONS

ASME BPE, DIN and ISO clamp ferrules or tube weld (ETO) ends

MAX. UPSTREAM PRESSURE

16 bar

MAX. DESIGN TEMPERATURE

150 ºC

REGULATING RANGE

0,2 to 8 bar

FLOW RATE COEFFICIENTS

Kvs 3,2 to 4,2
Ask for info

Whether you have a question about products, pricing, customized equipment, or anything else, our team is ready to help you.

P130G
P130G

The ADCA P130G series direct-acting, spring-loaded diaphragm sensing, balanced plug, pressure reducing valves are designed for use with clean air, nitrogen, carbon dioxide, oxygen, argon and other gases or liquids compatible with the construction materials and valve design. This valve is specifically designed for the high purity gas systems found in the pharmaceutical, cosmetic, fine chemical and food & beverage processes.

MATERIAL

Stainless steel

SIZES

11/2” – DN 32 and DN 40

CONNECTIONS

ASME BPE, DIN and ISO clamp ferrules or tube weld (ETO) ends

MAX. UPSTREAM PRESSURE

16 bar

MAX. DESIGN TEMPERATURE

150 ºC

REGULATING RANGE

0,2 to 8 bar

FLOW RATE COEFFICIENTS

Kvs 4,2 to 6,3
Ask for info

Whether you have a question about products, pricing, customized equipment, or anything else, our team is ready to help you.

P147
P147

The ADCA P147 series sanitary pilot operated pressure reducing valves are designed for use with clean air, nitrogen, carbon dioxide, oxygen, argon and other gases or liquids compatible with the construction materials and valve design. This valve is specifically designed for the high purity gas systems found in the pharmaceutical, cosmetic, fine chemical and food & beverage processes.

MATERIAL

Stainless steel

SIZES

21/2” to 3” – DN 65 to DN 80

CONNECTIONS

ASME BPE and DIN clamp ferrules

MAX. UPSTREAM PRESSURE

16 bar

MAX. DESIGN TEMPERATURE

150 ºC

REGULATING RANGE

0,2 to 8 bar

FLOW RATE COEFFICIENTS

Kvs 41 to 46
Ask for info

Whether you have a question about products, pricing, customized equipment, or anything else, our team is ready to help you.

P161
P161

The ADCAPure P161 is a series of angle design direct acting diaphragm sensing pressure reducing valves. These regulators, available with spring or dome-loading, are designed for use with clean steam, compressed air, water and other gases or liquids compatible with the construction materials and valve design.

MATERIAL

Stainless steel

SIZES

1/2” to 2” – DN 15 to 50

CONNECTIONS

ASME BPE, DIN and ISO clamp ferrules or tube weld (ETO) ends

MAX. UPSTREAM PRESSURE

8 bar

MAX. OPERATING TEMPERATURE

180 ºC

REGULATING RANGE

0,3 to 5 bar

FLOW RATE COEFFICIENTS

Kvs 1,3 to 13
Ask for info

Whether you have a question about products, pricing, customized equipment, or anything else, our team is ready to help you.

P160G
P160G

The ADCAPure P160G is a series of angle design direct acting diaphragm sensing pressure reducing valves. These regulators are designed for use with clean steam, compressed air, water and other gases or liquids compatible with the construction materials and valve design.

MATERIAL

Stainless steel body

SIZES

21/2” and 3”

CONNECTIONS

ASME BPE

MAX. UPSTREAM PRESSURE

8 bar

MAX. OPERATING TEMPERATURE

180 ºC

REGULATING RANGE

1 to 4 bar

FLOW RATE COEFFICIENTS

Kvs 19,8
Ask for info

Whether you have a question about products, pricing, customized equipment, or anything else, our team is ready to help you.

P163
P163

The ADCAPure P163 is a series of inline direct acting, diaphragm sensing pressure reducing valves. These regulators, available with spring or dome-loading, are designed for use with clean steam, compressed air, water and other gases or liquids compatible with the construction materials and valve design.

MATERIAL

Stainless steel

SIZES

1/2” to 2” – DN 15 to 50

CONNECTIONS

ASME BPE, DIN and ISO clamp ferrules or tube weld (ETO) ends

MAX. UPSTREAM PRESSURE

8 bar

MAX. OPERATING TEMPERATURE

180 ºC

REGULATING RANGE

0,8 to 5 bar

FLOW RATE COEFFICIENTS

Kvs 1,3 to 13
Ask for info

Whether you have a question about products, pricing, customized equipment, or anything else, our team is ready to help you.

P173
P173

The ADCA P173 series direct-acting, spring-loaded diaphragm sensing, pressure reducing valves are designed for use with clean steam, compressed air, water and other gases or liquids compatible with the construction materials.

MATERIAL

Stainless steel

SIZES

11/2” to 2” – DN 32 to DN 50

CONNECTIONS

ASME BPE, DIN and ISO clamp ferrules

MAX. UPSTREAM PRESSURE

8 bar

MAX. OPERATING TEMPERATURE

180 ºC

REGULATING RANGE

0,8 to 5 bar

FLOW RATE COEFFICIENTS

Kvs 5,5 or 8,5
Ask for info

Whether you have a question about products, pricing, customized equipment, or anything else, our team is ready to help you.

PS130
PS130

The ADCA PS130 series direct-acting, spring-loaded diaphragm sensing, pressure sustaining valves are designed for use with clean air, nitrogen, carbon dioxide, oxygen, argon and other gases or liquids compatible with the construction materials and valve design. This valve is specifically designed for the high purity gas systems found in the pharmaceutical cosmetic, fine chemical and food & beverage processes.

MATERIAL

Stainless steel

SIZES

1/2” to 1” – DN 08 to DN 25

CONNECTIONS

ASME BPE, DIN and ISO clamp ferrules or tube weld (ETO) ends

MAX. UPSTREAM PRESSURE

8 bar

MAX. DESIGN TEMPERATURE

150 ºC

REGULATING RANGE

0,2 to 8 bar

FLOW RATE COEFFICIENTS

Kvs 1,7 or 3
Ask for info

Whether you have a question about products, pricing, customized equipment, or anything else, our team is ready to help you.

PS161
PS161

The ADCAPure PS161 is a series of angle design direct acting diaphragm sensing pressure sustaining valves. These regulators, available with spring or dome-loading, are designed for use with clean steam, compressed air, water and other gases or liquids compatible with the construction materials and valve design.

MATERIAL

Stainless steel

SIZES

1/2” to 2” – DN 15 to 50

CONNECTIONS

ASME BPE, DIN and ISO clamp ferrules or tube weld (ETO) ends

MAX. UPSTREAM PRESSURE

8 bar

MAX. OPERATING TEMPERATURE

180 ºC

REGULATING RANGE

0,8 to 8 bar

FLOW RATE COEFFICIENTS

Kvs 1,3 to 13
Ask for info

Whether you have a question about products, pricing, customized equipment, or anything else, our team is ready to help you.

PS163
PS163

The ADCAPure PS163 is a series of direct acting diaphragm sensing pressure sustaining valves. These regulators, available with spring or dome-loading, are designed for use with clean steam, compressed air, water and other gases or liquids compatible with the construction materials and valve design.

MATERIAL

Stainless steel

SIZES

1/2” to 2” – DN 15 to 50

CONNECTIONS

ASME BPE, DIN and ISO clamp ferrules or tube weld (ETO) ends

MAX. UPSTREAM PRESSURE

8 bar

MAX. OPERATING TEMPERATURE

180 ºC

REGULATING RANGE

0,8 to 8 bar

FLOW RATE COEFFICIENTS

Kvs 1,3 to 13
Ask for info

Whether you have a question about products, pricing, customized equipment, or anything else, our team is ready to help you.

PS173
PS173

The ADCA P173 series direct-acting, spring-loaded diaphragm sensing, pressure reducing valves are designed for use with clean steam, compressed air, water and other gases or liquids compatible with the construction materials.

MATERIAL

Stainless steel

SIZES

11/2” to 2” – DN 32 to DN 50

CONNECTIONS

ASME BPE, DIN and ISO clamp ferrules

MAX. UPSTREAM PRESSURE

8 bar

MAX. OPERATING TEMPERATURE

180 ºC

REGULATING RANGE

0,8 to 8 bar

FLOW RATE COEFFICIENTS

Kvs 5,5 to 8,5
Ask for info

Whether you have a question about products, pricing, customized equipment, or anything else, our team is ready to help you.

BKR2
BKR2

Tank blanketing valves are commonly used in tank storage systems to prevent and protect against explosions (avoiding flammable liquids being vented from a vessel), to control product contamination against external air that may fill the vapor space, to reduce evaporation losses (consequently, production losses), to reduce internal corrosion (caused by air and moisture) and to prevent vacuum condition. The blanketing process consists of covering the stored medium, usually a liquid, with a gas (normally N2).

MATERIAL

Stainless steel

SIZES

1” – DN 25

CONNECTIONS

ASME BPE, DIN and ISO clamp ferrules
Flanged EN 1092-1 PN 16

MAX. UPSTREAM PRESSURE

12 bar

MAX. DESIGN TEMPERATURE

130 ºC

REGULATING RANGE

5 to 4000 mbar
Ask for info

Whether you have a question about products, pricing, customized equipment, or anything else, our team is ready to help you.

BKRi2
BKRi2

Tank blanketing valves are commonly used in tank storage systems to prevent and protect against explosions (avoiding flammable liquids being vented from a vessel), to control product contamination against external air that may fill the vapor space, to reduce evaporation losses (consequently, production losses), to reduce internal corrosion (caused by air and moisture) and to prevent vacuum condition. The blanketing process consists of covering the stored medium, usually a liquid, with a gas (normally N2).

MATERIAL

Stainless steel

SIZES

DN 15 and DN 25

CONNECTIONS

Flanged EN PN 16

MAX. UPSTREAM PRESSURE

12 bar

MAX. DESIGN TEMPERATURE

130 ºC

REGULATING RANGE

5 to 4000 mbar
Ask for info

Whether you have a question about products, pricing, customized equipment, or anything else, our team is ready to help you.

BKV2
BKV2

Tank blanketing valves are commonly used in tank storage systems to prevent and protect against explosions (avoiding flammable liquids being vented from a vessel), to control product contamination against external air that may fill the vapor space, to reduce evaporation losses (consequently, production losses), to reduce internal corrosion (caused by air and moisture) and to prevent vacuum condition. The blanketing process consists of covering the stored medium, usually a liquid, with a gas (normally N2).

MATERIAL

Stainless steel

SIZES

1” – DN 25

CONNECTIONS

ASME BPE, DIN and ISO clamp ferrules
Flanged EN 1092-1 PN 16

MAX. OPERATING PRESSURE

6 bar

MAX. DESIGN TEMPERATURE

130 ºC

REGULATING RANGE

5 to 4000 mbar
Ask for info

Whether you have a question about products, pricing, customized equipment, or anything else, our team is ready to help you.

BKVi2
BKVi2

Tank blanketing valves are commonly used in tank storage systems to prevent and protect against explosions (avoiding flammable liquids being vented from a vessel), to control product contamination against external air that may fill the vapor space, to reduce evaporation losses (consequently, production losses), to reduce internal corrosion (caused by air and moisture) and to prevent vacuum condition. The blanketing process consists of covering the stored medium, usually a liquid, with a gas (normally N2).

MATERIAL

Stainless steel

SIZES

DN 15 and DN 25

CONNECTIONS

Flanged EN PN 16

MAX. OPERATING PRESSURE

6 bar

MAX. DESIGN TEMPERATURE

130 ºC

REGULATING RANGE

5 to 4000 mbar
Ask for info

Whether you have a question about products, pricing, customized equipment, or anything else, our team is ready to help you.

Need Help

We're here to help and answer any questions you might have.