V16/2
V16/2

The ADCATrol V16/2 is a series of single seated, two-way globe control valves designed for simple process engineering and industrial applications with non-critical operating conditions. These valves can be assembled with pneumatic, hidraulic or electric actuators, for modulating and shut-off control tasks.

Richiedi info

Abbiamo un team sempre pronto ad aiutare in caso di dubbi su prodotti, prezzi, attrezzature personalizzate o qualsiasi altro argomento.

V16/2 (EN)
V16/2 (EN)

The ADCATrol V16/2 is a series of single seated, two-way globe control valves designed for simple process engineering and industrial applications with non-critical operating conditions. These valves can be assembled with pneumatic, hydraulic or electric actuators, for modulating and shut-off control tasks.

MATERIALE

V16/2G – SG iron
V16/2S – Acciaio al carbonio
V16/2i – Acciaio inox

DIMENSIONI

DN 15 a DN 100

COLLEGAMENTI

Flangia EN 1092-2 PN 16
Flangia EN 1092-1 PN 16 o PN 40

CACOEFFICIENTE DI FLUSSOPACITÀ

Kvs 2,1 a 160
Richiedi info

Abbiamo un team sempre pronto ad aiutare in caso di dubbi su prodotti, prezzi, attrezzature personalizzate o qualsiasi altro argomento.

V16/2 (ASME)
V16/2 (ASME)

The ADCATrol V16/2 is a series of single seated, two-way globe control valves designed for simple process engineering and industrial applications with non-critical operating conditions. These valves can be assembled with pneumatic, hydraulic or electric actuators, for modulating and shut-off control tasks.

MATERIALE

Acciaio al carbonio

DIMENSIONI

1/2” a 4”

COLLEGAMENTI

Flangia ASME B16.5 Classe 150 o 300

CACOEFFICIENTE DI FLUSSOPACITÀ

Kvs 2,1 to 160
Richiedi info

Abbiamo un team sempre pronto ad aiutare in caso di dubbi su prodotti, prezzi, attrezzature personalizzate o qualsiasi altro argomento.

V16/2 (Threaded)
V16/2 (Threaded)

The ADCATrol V16/2 is a series of single seated, two-way globe control valves designed for simple process engineering and industrial applications with non-critical operating conditions. These valves can be assembled with pneumatic, hydraulic or electric actuators, for modulating and shut-off control tasks.

MATERIALE

Acciaio al carbonio o acciaio inox

DIMENSIONI

1/2” a 2”

COLLEGAMENTI

Filettato ISO 7 Rp o NPT

CACOEFFICIENTE DI FLUSSOPACITÀ

Kvs 2,1 to 160
Richiedi info

Abbiamo un team sempre pronto ad aiutare in caso di dubbi su prodotti, prezzi, attrezzature personalizzate o qualsiasi altro argomento.

V25/2
V25/2

The ADCATrol V25/2 is a series of single seated, two-way globe valves designed for process engineering and industrial applications, where events such as erosion, cavitation or flashing may occur. These valves can be assembled with pneumatic, hydraulic or electric actuators, for modulating and shut-off control tasks.

Richiedi info

Abbiamo un team sempre pronto ad aiutare in caso di dubbi su prodotti, prezzi, attrezzature personalizzate o qualsiasi altro argomento.

V25/2 (EN)
V25/2 (EN)

The ADCATrol V25/2 is a series of single seated, two-way globe valves designed for process engineering and industrial applications, where events such as erosion, cavitation or flashing may occur. These valves can be assembled with pneumatic, hydraulic or electric actuators, for modulating and shut-off control tasks.

MATERIALE

Ghisa sferoidale, acciaio al carbonio o acciaio inox

DIMENSIONI

DN 15 a DN 200

COLLEGAMENTI

Flangia EN 1092-2 PN 16
Flangia EN 1092-1 PN 16 o PN 40

CACOEFFICIENTE DI FLUSSOPACITÀ

Kvs 0,1 a 630
Richiedi info

Abbiamo un team sempre pronto ad aiutare in caso di dubbi su prodotti, prezzi, attrezzature personalizzate o qualsiasi altro argomento.

V25/2 (ASME)
V25/2 (ASME)

The ADCATrol V25/2 is a series of single seated, two-way globe valves designed for process engineering and industrial applications, where events such as erosion, cavitation or flashing may occur. These valves can be assembled with pneumatic, hydraulic or electric actuators, for modulating and shut-off control tasks.

MATERIALE

Acciaio al carbonio

DIMENSIONI

DN 15 a DN 150

COLLEGAMENTI

Flangia ASME B16.5 Classe 150 o 300

CACOEFFICIENTE DI FLUSSOPACITÀ

Kvs 0,1 a 370
Richiedi info

Abbiamo un team sempre pronto ad aiutare in caso di dubbi su prodotti, prezzi, attrezzature personalizzate o qualsiasi altro argomento.

PV15
PV15

The ADCATrol PV15 is a series of single seated, two-way pneumatic on/off globe valves with diaphragm actuator. These valves are suitable for use with the most common process fluids such as steam, water, superheated water, air, neutral gases and oils.

Richiedi info

Abbiamo un team sempre pronto ad aiutare in caso di dubbi su prodotti, prezzi, attrezzature personalizzate o qualsiasi altro argomento.

PV15 (EN)
PV15 (EN)

The ADCATrol PV15 is a series of single seated, two-way pneumatic on/off globe valves with diaphragm actuator. These valves are suitable for use with the most common process fluids such as steam, water, superheated water, air, neutral gases and oils.

MATERIALE

SG iron, acciaio al carbonio e acciaio inox

DIMENSIONI

DN 15 a DN 100

COLLEGAMENTI

PV15G – Flangia EN 1092-2 PN 16
PV15S e PV15i – Flangia EN 1092-1 PN 16 o PN 40

CACOEFFICIENTE DI FLUSSOPACITÀ

Kvs 5,1 a 160
Richiedi info

Abbiamo un team sempre pronto ad aiutare in caso di dubbi su prodotti, prezzi, attrezzature personalizzate o qualsiasi altro argomento.

PV15 (ASME)
PV15 (ASME)

The ADCATrol PV15 is a series of single seated, two-way pneumatic on/off globe valves with diaphragm actuator. These valves are suitable for use with the most common process fluids such as steam, water, superheated water, air, neutral gases and oils.

MATERIALE

Acciaio al carbonio

DIMENSIONI

1/2" a 4"

COLLEGAMENTI

Flangia ASME B16.5 Classe 150 o 300

CACOEFFICIENTE DI FLUSSOPACITÀ

Kvs 5,1 a 160
Richiedi info

Abbiamo un team sempre pronto ad aiutare in caso di dubbi su prodotti, prezzi, attrezzature personalizzate o qualsiasi altro argomento.

PPV15
PPV15

The ADCATrol PPV15 is a series of single seated, two-way pneumatic on/off globe valves with piston actuator. These valves are suitable for use with the most common process fluids such as steam, water, superheated water, air, neutral gases and oils.

Richiedi info

Abbiamo un team sempre pronto ad aiutare in caso di dubbi su prodotti, prezzi, attrezzature personalizzate o qualsiasi altro argomento.

PPV15 (EN)
PPV15 (EN)

The ADCATrol PPV15 is a series of single seated, two-way pneumatic on/off globe valves with piston actuator. These valves are suitable for use with the most common process fluids such as steam, water, superheated water, air, neutral gases and oils.

MATERIALE

SG iron, acciaio al carbonio e acciaio inox

DIMENSIONI

DN 15 a DN 50

COLLEGAMENTI

PPV15G – Flangia EN 1092-2 PN 16
PPV15S e PPV15i – Flangia EN 1092-1 PN 16 o PN 40

CACOEFFICIENTE DI FLUSSOPACITÀ

Kvs 5,1 a 40
Richiedi info

Abbiamo un team sempre pronto ad aiutare in caso di dubbi su prodotti, prezzi, attrezzature personalizzate o qualsiasi altro argomento.

PPV15 (ASME)
PPV15 (ASME)

The ADCATrol PPV15 is a series of single seated, two-way pneumatic on/off globe valves with piston actuator. These valves are suitable for use with the most common process fluids such as steam, water, superheated water, air, neutral gases and oils.

MATERIALE

Acciaio al carbonio

DIMENSIONI

1/2" a 2"

COLLEGAMENTI

Flangia ASME B16.5 Classe 150 o 300

CACOEFFICIENTE DI FLUSSOPACITÀ

Kvs 5,1 a 40
Richiedi info

Abbiamo un team sempre pronto ad aiutare in caso di dubbi su prodotti, prezzi, attrezzature personalizzate o qualsiasi altro argomento.

PAV21
PAV21

The ADCATrol PAV21 is a series of pneumatic angle seat shut-off valves with piston actuators.  These valves are suitable for use with the most common process fluids such as steam, water, superheated water, air, neutral gases and oils. The PAV21 is recommended for applications where flexibility and affordability are important requirements. 

MATERIALE

Acciaio inox

DIMENSIONI

1/2” a 2”

COLLEGAMENTI

Filetto femmina ISO 7 Rp o NPT

CACOEFFICIENTE DI FLUSSOPACITÀ

Kvs 4,8 to 52,6

"RATING"

PN16
Richiedi info

Abbiamo un team sempre pronto ad aiutare in caso di dubbi su prodotti, prezzi, attrezzature personalizzate o qualsiasi altro argomento.

PV40
PV40

The PV40 control valves are single seated, two-way body constructed with in-line straight connections. The PA pneumatic actuator is rubber diaphragm and multi-springs. Its action can be DA – direct action (air to close) or RA – reverse action (air to open). The PV40 valves have been designed to ensure accurate control in any process condition. Their wide application ranges allow the use of this valve with the most common process fluids such as water, superheated water, steam, air, gas and other non-corrosive fluids.

MATERIALE

Acciaio al carbonio o acciaio inox

DIMENSIONI

DN 15 a DN 50

COLLEGAMENTI

Flangia EN PN 40
Flangia ASME Classe 150 o 300

CACOEFFICIENTE DI FLUSSOPACITÀ

Kvs 3,8 to 40,1
Richiedi info

Abbiamo un team sempre pronto ad aiutare in caso di dubbi su prodotti, prezzi, attrezzature personalizzate o qualsiasi altro argomento.

V303
V303

The ADCATrol V303 is a series of single seated, three-way globe control valves designed to ensure accurate control in mixing and diverting process engineering and industrial applications. These valves can be assembled with pneumatic, hydraulic or electric actuators, for modulating and shut-off control tasks.

MATERIALE

Acciaio al carbonio o acciaio inox

DIMENSIONI

DN 15 a DN 100

COLLEGAMENTI

Flanged EN PN 16 o PN 40

CACOEFFICIENTE DI FLUSSOPACITÀ

Kvs 4 a 160
Richiedi info

Abbiamo un team sempre pronto ad aiutare in caso di dubbi su prodotti, prezzi, attrezzature personalizzate o qualsiasi altro argomento.

V253
V253

The ADCATrol V253 is a series of three-way globe control valves designed to ensure accurate control in mixing or diverting general service applications.These valves can be assembled with pneumatic, hydraulic or electric actuators and used with the most common process fluids such as water, superheated water, thermal oil, steam, air, gas and other non corrosive fluids.

MATERIALE

Ghisa sferoidale

DIMENSIONI

DN 15 a DN 150

COLLEGAMENTI

Flangia EN PN 16 o PN 25

CACOEFFICIENTE DI FLUSSOPACITÀ

Kvs 4 to 330
Richiedi info

Abbiamo un team sempre pronto ad aiutare in caso di dubbi su prodotti, prezzi, attrezzature personalizzate o qualsiasi altro argomento.

PV403 | DN 15 - 50
PV403 | DN 15 - 50

The PV403 control valves are three-way valve body for mixing service. The PA pneumatic actuator is rubber diaphragm and multi-springs. Its action can be DA – direct action (air to close) or RA – reverse action (air to open). The V403 valves have been designed to assure an accurate control in any process condition. Their wide application ranges allow the use of this valve with the most common process fluids such as water, superheated water, diathermic oil, steam, air, gas and other non corrosive fluids.

MATERIALE

Acciaio al carbonio o acciaio inox

DIMENSIONI

DN 15 a DN 50

COLLEGAMENTI

Flangia EN PN 16 o PN 40
Flangia ASME Classe 150 o 300

CACOEFFICIENTE DI FLUSSOPACITÀ

Kvs 4 to 40
Richiedi info

Abbiamo un team sempre pronto ad aiutare in caso di dubbi su prodotti, prezzi, attrezzature personalizzate o qualsiasi altro argomento.

VPA26/2
VPA26/2

The VPA26/2 series of blowdown valves are specially designed for application on steam boilers, to remove sludge sediments which naturally settle on the bottom of the boiler. These intermittent valves operate manually or automatically with timed control. Available with diaphragm actuator and/or manual operation lever.

MATERIALE

Acciaio al carbonio o acciaio inox

DIMENSIONI

3/4” a 2” – DN 20 a DN 50

COLLEGAMENTI

Flangia EN PN 40
Flangia ASME Classe 300

CACOEFFICIENTE DI FLUSSOPACITÀ

Kvs 6,3 or 16
Richiedi info

Abbiamo un team sempre pronto ad aiutare in caso di dubbi su prodotti, prezzi, attrezzature personalizzate o qualsiasi altro argomento.

VPC26
VPC26

The  ADCATrol VPC26 is specially designed for TDS (Total Dissolved Solids) control applications in steam boilers.

MATERIALE

Acciaio al carbonio o acciaio inox

DIMENSIONI

1/2” a 11/2” – DN 15 a DN 40

COLLEGAMENTI

Flangia EN PN 40
Flangia ASME Classe 300

CACOEFFICIENTE DI FLUSSOPACITÀ

Kvs 1,2 to 2,5
Richiedi info

Abbiamo un team sempre pronto ad aiutare in caso di dubbi su prodotti, prezzi, attrezzature personalizzate o qualsiasi altro argomento.

OVF40
OVF40

The ADCATrol OVF40 is a series of single seated, two-way overflow valves with inline connections. These valves are mainly used in closed loop systems to ensure that a minimum flow is kept in the event that all connected consumers are in a low load condition or have simply shut down. In these scenarios, the valve will prevent problems such as pressure surges, pump cavitation and overheating.

MATERIALE

Acciaio al carbonio o acciaio inox

DIMENSIONI

DN 15 a DN 80

COLLEGAMENTI

Flangia EN PN 16 o PN 40

CACOEFFICIENTE DI FLUSSOPACITÀ

Kvs 5,2 to 89,7
Richiedi info

Abbiamo un team sempre pronto ad aiutare in caso di dubbi su prodotti, prezzi, attrezzature personalizzate o qualsiasi altro argomento.

PA10 – PA80T
PA10 – PA80T

PA series pneumatic multi-spring actuators with rolling diaphragm, offering decreased hysterisis and good linearity throughout the operating range. Available in air to close and air to open versions, for modulating and on/off services.

MATERIALE

Acciaio dolce o acciaio inox

DIMENSIONI

100 a 2400 cm2

PRESSIONE MASSIMA DI ALIMENTAZIONE

Fino a 6 bar

CORSA NOMINALE

Fino a 30 mm

THRUSTS

200 N a 120 kN
Richiedi info

Abbiamo un team sempre pronto ad aiutare in caso di dubbi su prodotti, prezzi, attrezzature personalizzate o qualsiasi altro argomento.

PA206 – PA436
PA206 – PA436

PA series pneumatic multi-spring actuators with rolling diaphragm, offering decreased hysterisis and good linearity throughout the operating range. Available in air to close and air to open versions, for modulating and on/off services.

MATERIALE

Acciaio dolce o acciaio inox

DIMENSIONI

140 a 700 cm2

PRESSIONE MASSIMA DI ALIMENTAZIONE

Fino a 6 bar

CORSA NOMINALE

Fino a 30 mm

THRUSTS

280 N a 17,5 kN
Richiedi info

Abbiamo un team sempre pronto ad aiutare in caso di dubbi su prodotti, prezzi, attrezzature personalizzate o qualsiasi altro argomento.

EL
EL

Electric linear actuators EL series for modulating and open-close duty of control and process technology to operate control valves. The self-locking stem/stem nut is driven by an electric motor via a gearing. Load and limit switches define the stops for the end positions.

CORSA NOMINALE

Fino a 100 mm

TENSIONI DI ALIMENTAZIONE

24 V, 115 V, 230 V, 400 V AC 50/60Hz24 V DC

PROTEZIONE IP

IP 43 / IP 65

THRUSTS

1,2 a 25 kN
Richiedi info

Abbiamo un team sempre pronto ad aiutare in caso di dubbi su prodotti, prezzi, attrezzature personalizzate o qualsiasi altro argomento.

Pneumatic and electric linear actuators
Pneumatic and electric linear actuators

Electric linear actuators ELS series for modulating and open-close duty of control and process technology to operate control valves. The self-locking stem/stem nut is driven by an electric motor via a gearing. Load and limit switches define the stops for the end positions.

CORSA NOMINALE

Fino a 95 mm

TENSIONI DI ALIMENTAZIONE

24 V AC/DC, 115 V AC, 230 V AC, 360 A 575 V AC 3~

PROTEZIONE IP

IP 65 (IP 67 su richiesta)

THRUSTS

2,3 a 25 kN
Richiedi info

Abbiamo un team sempre pronto ad aiutare in caso di dubbi su prodotti, prezzi, attrezzature personalizzate o qualsiasi altro argomento.

ELR
ELR

Electric linear actuators ELR series for modulating and open-close duty of control and process technology to operate control valves. The self-locking stem/stem nut is driven by an electric motor via a gearing. Load and limit switches define the stops for the end positions. In case of power failure, the electric linear actuator runs spring-driven into the respective fail-safe position.

CORSA NOMINALE

Fino a 46 mm

TENSIONI DI ALIMENTAZIONE

24 V, 115 V, 230 V, 400 V AC 50/60Hz24 V DC

PROTEZIONE IP

IP 54

THRUSTS

≥ 0,9 a ≥ 2,2 kN (fechado)≤ 4,0 a ≤ 5,3 kN (aberto)
Richiedi info

Abbiamo un team sempre pronto ad aiutare in caso di dubbi su prodotti, prezzi, attrezzature personalizzate o qualsiasi altro argomento.

AVM234S / AVF234S
AVM234S / AVF234S

The AVM234S / AVF234S valve actuators offer automatic adaptation to the stroke of the valve, precision activation and high energy efficiency with minimal operating noise. Ideal for use with any DSH series direct steam injection humidifier and in TDS (Total Dissolved Solids) control systems VCP blowdown valves.

CORSA NOMINALE

Fino a 49 mm

TENSIONI DI ALIMENTAZIONE

24 V, 115 V, 230 V AC 50/60Hz24 V DC

PROTEZIONE IP

IP 66

THRUSTS

2 o 2,5 kN
Richiedi info

Abbiamo un team sempre pronto ad aiutare in caso di dubbi su prodotti, prezzi, attrezzature personalizzate o qualsiasi altro argomento.

TR
TR

The TR valves series were designed for direct-acting temperature control systems where the valve closes on temperature rise. They are single seated, in order to ensure an excellent tightness and are intended to be coupled with the thermostat models T.205 and T.405.

Richiedi info

Abbiamo un team sempre pronto ad aiutare in caso di dubbi su prodotti, prezzi, attrezzature personalizzate o qualsiasi altro argomento.

TR25S | DN 15 - 25
TR25S | DN 15 - 25

MATERIALE

Carbon steel

DIMENSIONI

1/2” a 1”

COLLEGAMENTI

Filetto femmina ISO 7 Rp

FORZA DI CHIUSURAFORCE

Fino a 400 N

LUNGHEZZA

3 m as standard

"RATING"

PN 40

GAMMA DI TERMOSTATO

0 a 160 ºC
Richiedi info

Abbiamo un team sempre pronto ad aiutare in caso di dubbi su prodotti, prezzi, attrezzature personalizzate o qualsiasi altro argomento.

TR40 | DN 15 - 25
TR40 | DN 15 - 25

MATERIALE

Acciaio al carbonio o acciaio inox

DIMENSIONI

DN 15 a DN 25

COLLEGAMENTI

Flangia EN PN 40

FORZA DI CHIUSURAFORCE

Fino a 400 N

LUNGHEZZA

3 m standard

"RATING"

PN 40

GAMMA DI TERMOSTATO

0 a 160 ºC
Richiedi info

Abbiamo un team sempre pronto ad aiutare in caso di dubbi su prodotti, prezzi, attrezzature personalizzate o qualsiasi altro argomento.

TR25SS | DN 08 - 10
TR25SS | DN 08 - 10

MATERIALE

Acciaio inox

DIMENSIONI

1/4” a 3/8”

COLLEGAMENTI

Filetto femmina ISO 7 Rp

FORZA DI CHIUSURAFORCE

Fino a 200 N

LUNGHEZZA

3 m como standard

"RATING"

PN 40

GAMMA DI TERMOSTATO

0 a 120 ºC
Richiedi info

Abbiamo un team sempre pronto ad aiutare in caso di dubbi su prodotti, prezzi, attrezzature personalizzate o qualsiasi altro argomento.

TR25SS | DN 15 - 25
TR25SS | DN 15 - 25

MATERIALE

Acciaio inox

DIMENSIONI

1/2” a 1”

COLLEGAMENTI

Filetto femmina ISO 7 Rp

FORZA DI CHIUSURAFORCE

Fino a 400 N

LUNGHEZZA

3 m standard

GAMMA DI TERMOSTATO

0 a 160 ºC
Richiedi info

Abbiamo un team sempre pronto ad aiutare in caso di dubbi su prodotti, prezzi, attrezzature personalizzate o qualsiasi altro argomento.

TR25/R
TR25/R

The TR25/R valves series are designed for temperature control of cooling systems where the valve opens when the temperature rises. They are single seated, in order to ensure an excellent tightness, and are intended to be coupled with thermostat models T.205 and T.405.

MATERIALE

Acciaio al carbonio o acciaio inox

DIMENSIONI

1/2” a 1” – DN 15 a DN 25

COLLEGAMENTI

Filettato ISO 7 Rp
Flangia EN PN 40
Flangia ASME Classe 150 o 300

FORZA DI CHIUSURAFORCE

Fino a 400 N

LUNGHEZZA

3 m standard

GAMMA DI TERMOSTATO

0 a 160 ºC
Richiedi info

Abbiamo un team sempre pronto ad aiutare in caso di dubbi su prodotti, prezzi, attrezzature personalizzate o qualsiasi altro argomento.

BCS220
BCS220

The ADCATrol BCS220 is a blowdown controller specially designed for use with steam boilers. The device takes care of both TDS and intermittent blowdown controls. TDS (Total Dissolved Solids) is controlled through measurement of the boiler water electrical conductivity and intermittent control is performed via a blowdown timer. The device utilizes a clear multifunction LCD to display measured conductivity, temperature, operational alarm status and provide an intuitive user interface. The device is IP 66 rated NEMA 4X and can be panel, surface/wall and pipe mounted.

TENSIONI DI ALIMENTAZIONE

BCS220 – 90 a 265 V AC
BCS220-LV – 12 a 30 V DC

DIMENSIONI

150 x 161 x 119

PROTEZIONE IP

IP 66 NEMA 4X
Richiedi info

Abbiamo un team sempre pronto ad aiutare in caso di dubbi su prodotti, prezzi, attrezzature personalizzate o qualsiasi altro argomento.

PCS1 Pressure transmitter
PCS1 Pressure transmitter

The ADCATrol PCS1 is a series of pressure transmitters suitable for all industrial applications. It is specially designed to operate in severe conditions where high temperatures, pressure peaks, shock and vibrations are present. The PCS1 is extremely robust and reliable, thanks to its state of the art SMD electronics and compact all stainless steel construction.

DIMENSIONI E COLLEGAMENTI

Filettato macho
ISO 228 G 1/4''

CAMPI DI PRESSIONE

0 a 6 / 0 a 10 / 0 a 16
0 a 25 / 0 a 40 / 0 a 100
0 a 250 / 0 a 400 / 0 a 600

PRECISIONE

< ±0,5% FS

TEMPO DI RISPOSTA

< 1 ms

PROTEZIONE IP

IP 65 / IP 67

USCITA

4 a 20 mA (2-wire)
Richiedi info

Abbiamo un team sempre pronto ad aiutare in caso di dubbi su prodotti, prezzi, attrezzature personalizzate o qualsiasi altro argomento.

SPS21
SPS21

The ADCATrol SPS21 conductivity probe is typically used in steam applications to measure the conductivity of superheated boiler water, condensate or feedwater. The probe is used in conjunction with an ADCATrol BCS controller and a VPC series TDS blowdown control valve.

DIMENSIONI E COLLEGAMENTI

Filettato macho ISO 7 R 1/2''

FORZA DI CHIUSURAFORCE

239 ºc

PRESSIONE D'ESERCIZIO MASSIMA

32 bar

TEMPERATURA D'ESERCIZIO MASSIMA

239 ºc

PROTEZIONE IP

IP 65
Richiedi info

Abbiamo un team sempre pronto ad aiutare in caso di dubbi su prodotti, prezzi, attrezzature personalizzate o qualsiasi altro argomento.

SPS33
SPS33

The ADCATrol SPS33 conductivity probe is typically used in steam applications to measure the conductivity of superheated boiler water, condensate or feedwater. The probe is used in conjunction with an ADCATrol BCS controller and a VPC series TDS blowdown control valve.

DIMENSIONI E COLLEGAMENTI

Filettato macho ISO 228 1/2''

PRESSIONE D'ESERCIZIO MASSIMA

32 bar

TEMPERATURA D'ESERCIZIO MASSIMA

239 ºC

PROTEZIONE IP

IP 65
Richiedi info

Abbiamo un team sempre pronto ad aiutare in caso di dubbi su prodotti, prezzi, attrezzature personalizzate o qualsiasi altro argomento.

TRPT1
TRPT1

The ADCATrol TRPT1 is a series of Pt100 resistance temperature sensors specially designed for general industrial use. The sensing element is an RTD three wire device according to EN 60751 Class A. The sensor consists of a probe, a connection head and a measurement insert.

DIMENSIONI E COLLEGAMENTI

Filettato macho ISO 228 G – 1/2''

PROTEZIONE IP

IP 66

USCITA

3-wire Pt100 a EN 60751 – Classe A o 4 a 20 mA (2-wire)
Richiedi info

Abbiamo un team sempre pronto ad aiutare in caso di dubbi su prodotti, prezzi, attrezzature personalizzate o qualsiasi altro argomento.

SV32 Direct solenoid valve
SV32 Direct solenoid valve

3/2 way solenoid valves are available as single station units and they are designed for use with compressed air, mainly applied where on/ off control is required with pneumatic actuators.

MATERIALE

Lega di alluminio

DIMENSIONI E COLLEGAMENTI

Female threaded
ISO 7 Rp 1/4''

PRESSIONE D'ESERCIZIO MASSIMA

8 bar

TENSIONI DI ALIMENTAZIONE

220 V AC, 110 V AC, 24 V DC o 24 V AC

PROTEZIONE IP

IP 65
Richiedi info

Abbiamo un team sempre pronto ad aiutare in caso di dubbi su prodotti, prezzi, attrezzature personalizzate o qualsiasi altro argomento.

UD-720 Universal display
UD-720 Universal display

The ADCATrol UD-720 is a programmable digital panel display used for the measurement of standard sensor and analog signals applied in automation. It is ideally suited for use with our range of instrumentation such as pressure transmitters, temperature probes and others. The unit features a 24 V DC supply output for transmitters.  

TENSIONI DI ALIMENTAZIONE

24 V AC/DC
85 a 253 V AC/DC

DIMENSIONI

93 x 96 x 48 mm

PROTEZIONE IP

IP 65

PROTOCOLLO DI COMUNICAZIONE

MODBUS RTU
Richiedi info

Abbiamo un team sempre pronto ad aiutare in caso di dubbi su prodotti, prezzi, attrezzature personalizzate o qualsiasi altro argomento.

UC-820 Universal Process Controller
UC-820 Universal Process Controller

The ADCATrol UC-820 is a digital universal controller used in the automation of industrial processes. It is ideally suited for use with our range of instrumentation, electric and pneumatic control valves and other electrical equipment.

TENSIONI DI ALIMENTAZIONE

20 a 40 V AC/DC
85 a 253 V AC/DC

DIMENSIONI

101 x 48 x 96 mm

PROTEZIONE IP

IP 65

PROTOCOLLO DI COMUNICAZIONE

MODBUS RTU
Richiedi info

Abbiamo un team sempre pronto ad aiutare in caso di dubbi su prodotti, prezzi, attrezzature personalizzate o qualsiasi altro argomento.

P10 Air filter regulator
P10 Air filter regulator

The P10 air filter regulators are used to remove both solid and liquid impurities from the air and to regulate the output pressure to the required value for general purpose pneumatic systems. The filter bowl is transparent, allowing easy monitoring of the condensate level.

MATERIALE

Alluminio e policarbonato

DIMENSIONI E COLLEGAMENTI

Filetto femmina
ISO 7 Rp 1/4''
Richiedi info

Abbiamo un team sempre pronto ad aiutare in caso di dubbi su prodotti, prezzi, attrezzature personalizzate o qualsiasi altro argomento.

PC25 Field I to P converter
PC25 Field I to P converter

The ADCATrol PC25 is a compact device which converts a standard analog signal to a standard pneumatic signal, for the change-over between electrical controllers to pneumatic control valves, or from electrical measuring systems to pneumatic controllers. The PC25 is a force balance device, which converts a 4 to 20 mA input signal into a proportional linear 0,2 to 1 bar output signal, with a respective supply pressure of 1,7 to 5 bar.

PROTEZIONE IP

IP 65

INPUT SIGNAL

4 a 20 mA

USCITA

0,2 a 1 bar (3 a 15 psi)
0,4 a 1,2 bar (6 a 18 psi)

OPERATING TEMPERATURE

-40 a 85 ºC
Richiedi info

Abbiamo un team sempre pronto ad aiutare in caso di dubbi su prodotti, prezzi, attrezzature personalizzate o qualsiasi altro argomento.

PP981 Pneumatic positioner
PP981 Pneumatic positioner

The ADCATrol PP981 positioner requires an input signal of 0,2÷1bar (3÷15psi) for the proportional control actuator. The positioner compares the output signal from a controller with the position feedback and varies a pneumatic output signal to the actuator accordingly. The actuator position is therefore guaranteed for any controller output signal and the effects of varying differential pressure.

PROTEZIONE IP

IP 54 (IP 65 su richiesta)

AVAILABLE APPROVALS

ATEX

COMMUNICATION

0,2 a 1 bar (3 a 15 psi)

OPERATING TEMPERATURE

-40 a 80 ºC
Richiedi info

Abbiamo un team sempre pronto ad aiutare in caso di dubbi su prodotti, prezzi, attrezzature personalizzate o qualsiasi altro argomento.

PE986 Electro-pneumatic positioner
PE986 Electro-pneumatic positioner

The ADCATrol PE986 positioner requires an input signal of 4÷20 mA for the proportional control actuator. The positioner compares the output signal from a controller with the position feedback and varies a pneumatic output signal to the actuator accordingly. The actuator position is therefore guaranteed for any controller output signal and the effects of varying differential pressure.

PROTEZIONE IP

IP 54 (IP 65 su richiesta)

AVAILABLE APPROVALS

ATEX

COMMUNICATION

4 a 20 mA

OPERATING TEMPERATURE

-40 a 80 ºC
Richiedi info

Abbiamo un team sempre pronto ad aiutare in caso di dubbi su prodotti, prezzi, attrezzature personalizzate o qualsiasi altro argomento.

PS100
PS100

The ADCATrol PS100 is a digital electronically configurable positioner designed for mounting to pneumatic linear or rotary actuators. It features a small and compact design with an excellent cost-performance ratio.
Fully automatic determination of the control parameters and adaptation to the final control element yield considerable time savings and an optimal control behaviour.

PROTEZIONE IP

IP 66 NEMA 4X

AVAILABLE APPROVALS

ATEX, FM, CSA e IECEx

COMMUNICATION

4 a 20 mA

OPERATING TEMPERATURE

-20 a 80 ºC
Richiedi info

Abbiamo un team sempre pronto ad aiutare in caso di dubbi su prodotti, prezzi, attrezzature personalizzate o qualsiasi altro argomento.

TZIDC Intelligent positioner
TZIDC Intelligent positioner

The ADCATrol TZIDC is a digital intelligent electronically configurable positioner with communication capabilities designed for mounting to pneumatic linear or rotary actuators. It features a small and compact design, a modular construction, and an excellent cost-performance ratio. Fully automatic determination of the control parameters and adaptation to the final control element yield considerable time savings and an optimal control behaviour.

PROTEZIONE IP

IP 65 (IP 66 su richiesta)
NEMA 4X

AVAILABLE APPROVALS

ATEX, SIL3, FM, CSA, GOST e IECEx

COMMUNICATION

4 a 20 mA,
HART, Profibus PA o
FOUNDATION Fieldbus-H1

OPERATING TEMPERATURE

-40 a 85 ºC
Richiedi info

Abbiamo un team sempre pronto ad aiutare in caso di dubbi su prodotti, prezzi, attrezzature personalizzate o qualsiasi altro argomento.

Hai bisogno di aiuto?

Siamo a disposizione per rispondere a qualsiasi dubbio tu possa avere.