ISC16
ISC16

The ISC16 high-efficiency filters are used to remove contaminated particles from gases such as steam and compressed air. The optimized construction of these units offers low differential pressure at high flow rates. All sizes are built in two halves. Up to 3” / DN 80, they are joined by a food industry fitting according to DIN 11851 and the larger sizes DN 100 to DN 200 by flat flanges fixed with bolts and nuts.

DIMENSIONI

1/4” a 3” – DN 10 a DN 80

COLLEGAMENTI

Filetto femmina ISO 7 Rp o NPT
Flangia EN PN 16
Flangia ASME Classe 150

PRESSIONE D'ESERCIZIO MASSIMA

10 bar @ 200 ºC

Richiedi info

Abbiamo un team sempre pronto ad aiutare in caso di dubbi su prodotti, prezzi, attrezzature personalizzate o qualsiasi altro argomento.

ISC20i
ISC20i

The ISC20i high efficiency filters are used to remove contaminated particles from gases such as steam and compressed air. The optimized construction of these units offers low differential pressure at high flow rates. All sizes are built in two halves, with 1/4" to 3" being joined by a sanitary clamp ferrule according to DIN 32676 Series A. Whereas 4" to 6" are joined by bolts and nuts. All sizes include plugged drain and vent connections. The replaceable filter elements are made of sintered austenitic stainless steel and available with 1, 5 or 25 micron absolute rating.

DIMENSIONI

1/4” a 6” – DN 10 a DN 150

COLLEGAMENTI

Filetto femmina ISO 7 Rp o NPT
Flangia EN 1092-1 PN 16
Flangia ASME B16.5 Classe 150
Altri su richiesta

PRESSIONE D'ESERCIZIO MASSIMA

Fino a 16 bar

TEMPERATURA D'ESERCIZIO MASSIMA

Fino a 200 ºC

Richiedi info

Abbiamo un team sempre pronto ad aiutare in caso di dubbi su prodotti, prezzi, attrezzature personalizzate o qualsiasi altro argomento.

ISH10i
ISH10i

The ISH10i high-efficiency filters are used to remove contaminated particles from gases such as steam and compressed air. The optimized construction of these units offers low differential pressure at high flow rates. All sizes are built in two halves and are joined by a sanitary clamp ferrule according to DIN 32676 Series A.

DIMENSIONI

1/2” a 2” – DN 10 a DN 50

COLLEGAMENTI

Ferrule clamp ASME BPE, DIN e ISO

PRESSIONE D'ESERCIZIO MASSIMA

10 bar @ 200 ºC

Richiedi info

Abbiamo un team sempre pronto ad aiutare in caso di dubbi su prodotti, prezzi, attrezzature personalizzate o qualsiasi altro argomento.

S10H
S10H

When wet steam is used in sterilization, moisture in suspension reduces the heat transfer efficiency, and the validity of the sterilization process can be compromised. S10H series baffle separators remove moisture from steam pipelines. Steam passes through the separator and as a result of expansion, impact and swirling effects, the particles with a heavier specific gravity are separated, such as water droplets and moisture in suspension. The condensate collected at the bottom of the separator must be automatically drained by a suitable steam trap.

MATERIALE

Acciaio inox

DIMENSIONI

1/2” a 3”

COLLEGAMENTI

Ferrule clamp ASME BPE

PRESSIONE MASSIMA AMMISSIBILE

10 bar

TEMPERATURA RELATIVA MASSIMA

200 ºC

Richiedi info

Abbiamo un team sempre pronto ad aiutare in caso di dubbi su prodotti, prezzi, attrezzature personalizzate o qualsiasi altro argomento.

S10HV
S10HV

When wet steam is used in sterilization, moisture in suspension reduces the heat transfer efficiency, and the validity of the sterilization process can be compromised. S10HV series centrifugal separators remove moisture from steam pipelines. Steam passes through the separator and as a result of centrifugal forces, impact and swirling effects, the particles with a heavier specific gravity are separated, such as water droplets and moisture in suspension. The condensate collected at the bottom of the separator must be automatically drained by a suitable steam trap.

MATERIALE

Acciaio inox

DIMENSIONI

1/2” a 2”

COLLEGAMENTI

Ferrule clamp ASME BPE

PRESSIONE MASSIMA AMMISSIBILE

10 bar

TEMPERATURA RELATIVA MASSIMA

200 ºC

Richiedi info

Abbiamo un team sempre pronto ad aiutare in caso di dubbi su prodotti, prezzi, attrezzature personalizzate o qualsiasi altro argomento.

S11
S11

When wet steam is used in sterilization, moisture in suspension reduces the heat transfer efficiency, and the validity of the sterilization process can be compromised. S11 series centrifugal separators remove moisture from steam pipelines. Steam passes through the separator and, as a result of centrifugal forces, impact and swirling effects, the particles with a heavier specific gravity are separated, such as water droplets and moisture in suspension. The condensate collected at the bottom of the separator must be automatically drained by a suitable steam trap.

MATERIALE

Acciaio inox

DIMENSIONI

1/2” a 2”

COLLEGAMENTI

Ferrule clamp ASME BPE

PRESSIONE MASSIMA AMMISSIBILE

10 bar

TEMPERATURA RELATIVA MASSIMA

200 ºC

Richiedi info

Abbiamo un team sempre pronto ad aiutare in caso di dubbi su prodotti, prezzi, attrezzature personalizzate o qualsiasi altro argomento.

DSHS
DSHS

The ADCA DSHS series of hygienic direct steam injection humidifiers are designed to ensure highly efficient and moisture free clean steam injection in air ducts and AHU for humidification purposes. These units are completely manufactured in 316L stainless steel, and are available as plug and play packaged solutions or alternatively as individual components to be incorporated into humidification systems.

Richiedi info

Abbiamo un team sempre pronto ad aiutare in caso di dubbi su prodotti, prezzi, attrezzature personalizzate o qualsiasi altro argomento.

SC32P
SC32P

The ADCAPure SC32P sample cooler consists in a helical-coil heat exchanger used to take samples quickly and safely from steam generators, clean or pure steam systems, WFI and other high purity mediums. Its spiral design saves significant space without compromise and a counter current flow path maximizes heat transfer and consequently cooling efficiency. The vertical sampling side ensures self drainability, as medium flows naturally by gravity to the sample outlet with no chance to remain inside. 

MATERIALE

Acciaio inox

DIMENSIONI E COLLEGAMENTI

Entrata/uscita acqua di raffreddamento: 1/2 "sul corpo (ISO 7 Rp o NPT) o tri-clamp da 3/4 ”
Entrata/uscita del tubo del campione: 8 mm O/D
Alternativa: compatibile con tri-clamp da 1/2 ”

Richiedi info

Abbiamo un team sempre pronto ad aiutare in caso di dubbi su prodotti, prezzi, attrezzature personalizzate o qualsiasi altro argomento.

Special equipment
Special equipment

ADCAPure taylor-made equipment, such as skid mounted systems, clean steam injectors, mushroom style air vents, and others, are available as a complement of this wide sanitary range.

Richiedi info

Abbiamo un team sempre pronto ad aiutare in caso di dubbi su prodotti, prezzi, attrezzature personalizzate o qualsiasi altro argomento.

Hai bisogno di aiuto?

Siamo a disposizione per rispondere a qualsiasi dubbio tu possa avere.