BACK TO CATEGORIES
SAV10
SAV10

The SAV10 sanitary air vent is a self-acting valve designed for air venting applications with liquids. The valve closes when filled with liquid product. As the level falls, the valve opens if pressure is also relieved. The valve does not open under operating pressure, thus being mostly used as a start-up bleeding valve. Typical applications include air venting in CIP lines, tanks, high points in pipelines, amongst others.

MATERIAL

Stainless steel

SIZES

1'' x 3/4" and 1" x 1"

CONNECTIONS

ASME BPE clamp ferrules

FLOW RATE CAPACITY

Up to 3982 NL/min
Ask for info

Whether you have a question about products, pricing, customized equipment, or anything else, our team is ready to help you.

VB16C
VB16C

The VB16C vacuum breakers are simple and reliable devices that automatically relieve or “break” an unwanted vacuum condition, restoring the atmospheric pressure. This device is particularly suitable for steam heated units of small and medium volume, such as heat exchangers, heating coils, calorifiers, jacketed kettles, steam boilers, etc.

MATERIAL

Stainless steel

SIZES

1" – DN 25

CONNECTIONS

ASME BPE, DIN and ISO clamp ferrules

MAX. OPERATING PRESSURE

16 bar

MAX. OPERATING TEMPERATURE

180 ºC
Ask for info

Whether you have a question about products, pricing, customized equipment, or anything else, our team is ready to help you.

SWS
SWS

The SWS sanitary sight glasses are designed to monitor liquid flow in any direction. Sight glasses (or flow indicators) are usually employed to detect either the presence or absence of fluid flow, turbulence, colour, etc. They are especially recommended for high purity applications.

MATERIAL

Stainless steel

SIZES

1/2" to 4"

CONNECTIONS

ASME BPE clamp ferrules

MAX. OPERATING PRESSURE

20 bar

MAX. OPERATING TEMPERATURE

200 ºC
Ask for info

Whether you have a question about products, pricing, customized equipment, or anything else, our team is ready to help you.

SRT10
SRT10

The SRT10 all stainless steel disc check valve has a compact design and is specially designed for use with clean steam, hot condensate and other process fluid applications. They are particularly recommended for high purity applications.

MATERIAL

Stainless steel

SIZES

1/2" to 4"

CONNECTIONS

ASME BPE clamp ferrules or tube weld (ETO) ends

MAX. OPERATING PRESSURE

10 bar

MAX. OPERATING TEMPERATURE

200 ºC
Ask for info

Whether you have a question about products, pricing, customized equipment, or anything else, our team is ready to help you.

M3HP
M3HP

M3HP three piece body ball valves are isolating valves designed for use with clean steam, condensate and other gases and liquids used in high purity and aseptic processes. The valve is not designed as a control valve and should only be used as an isolating valve, fully open or fully closed. The product is mainly designed for the pharmaceutical, biotech, semiconductor, cosmetics, fine chemical, food and beverage industries.

Ask for info

Whether you have a question about products, pricing, customized equipment, or anything else, our team is ready to help you.

M3HP | 1/2" to 2" – DN 10 to DN 50
M3HP | 1/2" to 2" – DN 10 to DN 50

MATERIAL

Stainless steel (bar stock)

SIZES

1/2" to 2" – DN 10 to DN 50

CONNECTIONS

ASME BPE or DIN clamp ferrules, tube weld (ETO) ends or a combination of both

MAX. OPERATING PRESSURE

40 bar

MAX. OPERATING TEMPERATURE

220 ºC
Ask for info

Whether you have a question about products, pricing, customized equipment, or anything else, our team is ready to help you.

M3HP | 21/2" to 4" – DN 65 to DN 100
M3HP | 21/2" to 4" – DN 65 to DN 100

MATERIAL

Stainless steel (bar stock)

SIZES

21/2" to 4" – DN 65 to DN 100

CONNECTIONS

ASME BPE or DIN clamp ferrules, tube weld (ETO) ends or a combination of both

MAX. OPERATING PRESSURE

40 bar

MAX. OPERATING TEMPERATURE

220 ºC
Ask for info

Whether you have a question about products, pricing, customized equipment, or anything else, our team is ready to help you.

M3HP | 6"
M3HP | 6"

MATERIAL

Stainless steel (bar stock)

SIZES

6"

CONNECTIONS

ASME BPE clamp ferrules, tube weld (ETO) ends or a combination of both

MAX. OPERATING PRESSURE

40 bar

MAX. OPERATING TEMPERATURE

220 ºC
Ask for info

Whether you have a question about products, pricing, customized equipment, or anything else, our team is ready to help you.

M3H
M3H

M3H three pieces body ball valves are isolating valves designed for use with clean steam, condensate and other gases and liquids used in high purity and aseptic processes. The valve is not designed as a control valve and should only be used as an isolating valve, fully open or fully closed. The product is mainly designed for the pharmaceutical, biotech, semiconductor, cosmetics, fine chemical, food and beverage industries.

Ask for info

Whether you have a question about products, pricing, customized equipment, or anything else, our team is ready to help you.

M3H | 1/2" to 2" – DN 10 to DN 50
M3H | 1/2" to 2" – DN 10 to DN 50

MATERIAL

Stainless steel (investment casting)

SIZES

1/2" to 2" – DN 10 to DN 50

CONNECTIONS

ASME BPE or DIN clamp ferrules, tube weld (ETO) ends or a combination of both

MAX. OPERATING PRESSURE

40 bar

MAX. OPERATING TEMPERATURE

220 ºC
Ask for info

Whether you have a question about products, pricing, customized equipment, or anything else, our team is ready to help you.

M3H | 21/2" to 4" – DN 65 to DN 100
M3H | 21/2" to 4" – DN 65 to DN 100

MATERIAL

Stainless steel (investment casting)

SIZES

21/2" to 4" – DN 65 to DN 100

MAX. OPERATING PRESSURE

40 bar

MAX. OPERATING TEMPERATURE

220 ºC
Ask for info

Whether you have a question about products, pricing, customized equipment, or anything else, our team is ready to help you.

M3H | 6"
M3H | 6"

MATERIAL

Stainless steel (investment casting)

SIZES

6"

CONNECTIONS

ASME BPE clamp ferrules, tube weld (ETO) ends or a combination of both

MAX. OPERATING PRESSURE

40 bar

MAX. OPERATING TEMPERATURE

220 ºC
Ask for info

Whether you have a question about products, pricing, customized equipment, or anything else, our team is ready to help you.

SMAN-63
SMAN-63

The SMAN-63 are reliable general purpose sanitary bourdon tube pressure gauges designed for pressure measurement of liquid and gaseous media. These units have a size diameter of 63 mm, range marked in bar and are fully manufactured in stainless steel.

SIZES

3/4"

CONNECTIONS

ASME BPE clamp ferrules
Others on request

AMBIENT TEMPERATURE

-10 ºC to 60 ºC

MAX. OPERATING TEMPERATURE

120 ºC

PRESSURE RANGES

0 to 4 bar / 0 to 6 bar
0 to 10 bar / 0 to 16 bar

ACCURACY

±2,5% FS
Ask for info

Whether you have a question about products, pricing, customized equipment, or anything else, our team is ready to help you.

Need Help

We're here to help and answer any questions you might have.